1. Home /
  2. Product finder

Building Entry Tee

With integral sealing plug GIS/PL3

AVK UK Gas Sales Andy Hatton

Andy Hatton

National Sales Manager – Gas

House Entry Tee

The Donkin Series 219 Range of Building Entry Tees has been designed to enable gas to be taken from outside to inside a Building safely. The fittings form a transition from the Polyethylene service pipe through the wall of a building for onward connection to the internal pipework. Connection to the service pipe is either by crimp or factory fitted GIS/PL3 connection and the internal connection is by BSP screwed thread. These fittings contain an integral plug that allows the gas flow to be interrupted externally should the need arise.

Variant 219/31-001
Connection: No connection type specified
Material: Steel
DN: DN20 - DN63
PN: PN 4
Closing direction: Clockwise to Close

Features

  • Integral Sealing Plug to "shut off" gas supply.
  • Zinc Plated and PL3 compliant coating for extra corrosion protection.
  • Domed Top Cap to prevent water retention
  • Specially designed wall plate to prevent water ingress
  • GRP cover pipe slides onto special taper to locate in correct place to ensure PE pipe and crimp is always covered.
  • Crimp connection to small diameter pipes.
  • 100% pressure tested before despatch
  • Compatible with existing tooling

Downloads

Datasheet
Certificate(s)
Installation, Operation & Maintenance
Price list

Reference nos. and dimensions:

Scroll for more info
Ref. no. DN
mm		 Through
wall L / mm		 H7
mm		 L1
mm		 D
mm		 G Thread (in ")
G thread		 PE Length
mm		 GRP L
mm		 Theoretical
weight/kg
219-200-00 20 150 70 36 32 R 3/4 - - 0.7
219-200-01 20 345 70 36 32 R 3/4 - - 1.1
219-200-02 20 500 70 36 32 R 3/4 - - 1.5
219-200-06 20 910 70 36 32 R 3/4 - - 2.0
219-250-00 25 150 70 36 32 R 3/4 - - 0.8
219-250-01 25 345 70 36 32 R 3/4 - - 1.1
219-250-02 25 500 70 36 32 R 3/4 - - 1.5
219-321-00 32 150 86 36 40 R 1 - - 1.2
219-321-01 32 345 86 36 40 R 1 - - 1.6
219-321-02 32 500 86 36 40 R 1 - - 2.1
219-321-03 32 610 86 36 40 R 1 - - 2.5
219-321-04 32 1000 86 36 40 R 1 3.0
219-632-00-001 63 150 125 50 75 R 2 1000 900 4.0
219-632-01-001 63 345 125 50 75 R 2 1000 900 5.4
219-632-02-001 63 500 125 50 75 R 2 1000 900 6.8
219-632-03-001 63 610 125 50 75 R 2 1000 900 7.8
219-632-04-001 63 1000 125 50 75 R 2 1000 900 9.0
Enquiry
Scroll for more info

Components

1. Body Zinc plated steel
2. Top cap Zinc plated steel
3. O-ring NBR rubber
4. Plug POM
5. O-ring NBR rubber
6. Plate Rubber
7. Washer PTFE
8. Through Wall Protection Pipe PE 80
9. Spring Washer
10. Crimp tube Copper
11. Pipe PE 80
12. Sleeve Steel
13. Pipe GRP

Test/Approvals

  • Hydraulic test according to EN 1074-1 / EN 12266

    |
  • Test according to GIS/PL3
  • Approved according to Kitemark™ GIS/PL3, certificate KM 518241

Standards

  • Designed according to GIS/PL3
0 Files In the package