AVK RESILIENT SEATED GATE VALVE, PN16
Clockwise to Close / Open. Product upgraded - see 21/35-001
Mamoun Humayra
Water Product Manager
Resilient seated gate valve to BS EN 1074-2 / BS 5163-1 for water and waste water. Temperature range: -10° C to +70° C. 10% solid matter. Insulation essential for temperatures of 0° C and below. Maximum Working pressure: 16 Bar.
The 21/50 is a resilient seat, wedge gate valve for isolation purposes suitable for use with water and neutral liquids (sewage) to a maximum temperature of up to +70°C.
| Variant 21/50-002 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile Iron |
| DN: | DN50 |
| PN: | PN 16 |
Features
- Cap top as standard.
- Ductile iron wedge, fully vulcanized with EPDM rubber.
- O-ring stem seals replaceable under pressure.
- Fully corrosion resistant construction.
- Blue fusion bonded epoxy coating, in accordance with WIS 4-52-01.
- Body, bonnet and gland bolts sealed with hot melt.
- Lifting bars.
- Options:
- PN10 flange drilling.
- ISO flange gland version for gearbox and actuator mounting (21/78).
- Version available for salt laden environments (21/58).
- Safety Note:
- The valves now accomodate lifting bars for the safe handling of valves. These lifting bars are rated to the weight of the bare valve and stem cap (where fitted) only and should not be utilised if the valve is fitted with pipe, mechanical pipe joints, gearboxes, actuators or any other external fitment. AVK will not accept any responsibility for loss or damage if the lifting bars are not used in strict accordance with this guidance.
Downloads
Datasheet
Related Datasheets
Certificate(s)
Installation, Operation & Maintenance
Product Brochure
FAQs
Guidelines
Price list
Reference nos. and dimensions:
Scroll for more info
| Ref. no. | DN mm |
Operating Direction |
Flange drillling |
L mm |
H3 mm |
H mm |
F1 mm |
W mm |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|
| 50 | CTC | ANSI | - |
Enquiry
Scroll for more info
Components
| 1. | Stem Cap | Cast iron GJL-250 |
| 2. | Stem | Stainless steel 1.4021 |
| 3. | Seals | NBR rubber |
| 4. | Gland flange | Ductile Iron GJS-500-7 |
| 5. | Thrust collar | DZR brass |
| 6. | Bonnet | Ductile Iron GJS-500-7 |
| 7. | Bonnet bolt | Steel 8.8 |
| 8. | Wedge | Ductile Iron GJS-500-7 |
| 9. | Body | Ductile Iron GJS-500-7 |
| 10. | Bonnet gasket | EPDM |
| 11. | Coating | Epoxy |
Test/Approvals
- Drinking Water Inspectorate Regulation 31 compliant
- WRAS approved Materials
Standards
- Designed according to BS EN 1074 -1 and 2
- Face to face according to EN 558 Table 2 Basic Series 3
- Standard flange drilling to EN1092 (ISO 7005-2), PN 16
