AVK GATE VALVE, FLANGED, PN10/16
EN558/s.3, bosses for by-pass, A2 bolts, DN450-600, GSK coating
Mamoun Humayra
Water Product Manager
Flanged gate valve for drinking water and neutral liquids to max. 70°C
AVK gate valves are designed with built-in safety in every detail. The wedge is fully vulcanized with AVK’s own EPDM rubber compound with WRAS and DVGW W270 drinking water approval. It features an outstanding durability due to the ability of the rubber to regain its original shape, the double bonding vulcanization process and the sturdy wedge design. The quadruple stem sealing system, the high strength stem and the thorough corrosion protection safeguard the unmatched reliability.
| Variant 55/66-001 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile Iron |
| DN: | DN450 - DN600 |
| PN: | PN 16 |
| Closing direction: | Clockwise to Close |
Features
- Wedge nut firmly fixed in the wedge as an integral part to prevent vibration
- Wedge fully vulcanized in drinking water approved EPDM and fitted with wedge shoes that protect the rubber and provide low operating torque
- Stem in stainless steel and brass wedge nut for high corrosion resistance
- A large conical stem hole in the wedge prevents stagnant water from accumulating inside the valve
- Three independent stem seals: outermost a wiper ring protects against the environment, backed up by the two O-rings surrounding the radial bearing and innermost the main hydraulic seal to the flow consists of one or two O-rings
- Thrust bearing consisting of stainless steel discs coated with a low friction, self-lubricating bronze-PTFE composite
- Round bonnet gasket fixed in a recess to avoid blow out
- Counterbored A2-70 stainless steel bonnet bolts encircled by the bonnet gasket and sealed with hot-melt glue
- ISO actuator flange; electric actuator or gearbox is recommended
- Coating in 250 µm blue RAL 5017 fusion bonded epoxy (FBE) to GSK and DIN 3476
- Installation with horizontal or vertical stem
- Bosses for by-pass
- Removable gland flange for replacement of thrust- and radial bearings and seals under pressure
Downloads
Reference nos. and dimensions:
| Ref. no. | DN mm |
Flange drillling |
L mm |
W mm |
W1 mm |
H mm |
H3 mm |
F2 mm |
D2 mm |
Dh mm |
Ds mm |
Bolt No. |
ISO Flange |
Theoretical weight/kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 55-450-66-00464 | 450 | PN10 | 432 | 791 | 396 | 1016 | 1393 | 70 | 30 | 565 | 29.5 | 20 | F16 | 450 |
| 55-450-66-01464 | 450 | PN16 | 432 | 807 | 396 | 1016 | 1406 | 70 | 30 | 585 | 32.5 | 20 | F16 | 496 |
| 55-500-66-00464 | 500 | PN10 | 457 | 806 | 411 | 1041 | 1446 | 70 | 30 | 620 | 29.5 | 20 | F16 | 467 |
| 55-500-66-01464 | 500 | PN16 | 457 | 847 | 431 | 1041 | 1468 | 70 | 30 | 650 | 35.5 | 20 | F16 | 531 |
| 55-600-66-00464 | 600 | PN10 | 508 | 926 | 461 | 1179 | 1648 | 79 | 40 | 725 | 31 | 20 | F16 | 658 |
| 55-600-66-01464 | 600 | PN16 | 508 | 966 | 491 | 1179 | 1678 | 79 | 40 | 770 | 38.5 | 20 | F16 | 757 |
Components
| 1. | Body | Ductile iron GJS-500-7 |
| 2. | Washer | Stainless steel A2-70 |
| 3. | Bolt | Stainless steel A2-70 |
| 4. | Clip for Wedge | Brass CW612N |
| 5. | Blind plate | Ductile iron GJS-500-7 |
| 6. | Wedge shoe | PA 6.6 |
| 7. | Wedge rubber | EPDM |
| 8. | Wedge core | Ductile iron GJS-500-7 |
| 9. | Wedge nut | Brass CW724R |
| 10. | Stem | Stainless steel 1.4021 |
| 11. | Bonnet gasket | EPDM |
| 12. | Bonnet | Ductile iron GJS-500-7 |
| 13. | Bolt | Stainless steel A2-70 |
| 14. | Slotted pin | Stainless steel 1.4404 |
| 15. | Key | Stainless steel A2-70 |
| 16. | Gland flange | Ductile iron GJS-500-7 |
| 17. | Wiper ring | NBR rubber |
| 18. | O-ring | EPDM |
| 19. | Bearing shell | PA 6.6 |
| 20. | O-ring | EPDM |
| 21. | O-ring | EPDM |
| 22. | Bolt | Stainless steel A2-70 |
| 23. | Thrust washer | Stainless steel 1.4057 |
| 24. | Thrust collar | Stainless steel 1.4404 |
| 25. | Thrust bearing | Stainless steel / PTFE coated |
| 26. | O-ring | EPDM |
| 27. | O-ring | EPDM |
Test/Approvals
-
Seat: 1.1 x PN (in Bar), Body: 1.5 x PN (in Bar). Closing torque test.
Standards
- Designed according to BS EN 1074 -1 and 2
- Face to face according to EN 558 Table 2 Basic Series 3
- Standard flange drilling to EN1092 (ISO 7005-2), PN 10/16
-
WRAS Approved Product